# When I package my project for Qfield, for some eldritch reason It leaves out all features on a specific layer

**URL:** <https://community.qfield.org/t/when-i-package-my-project-for-qfield-for-some-eldritch-reason-it-leaves-out-all-features-on-a-specific-layer/635>\
**Category:** Ask the Community\
**Tags:** gh-import\
**Created:** [14 May 2025 02:42 UTC](https://community.qfield.org/t/when-i-package-my-project-for-qfield-for-some-eldritch-reason-it-leaves-out-all-features-on-a-specific-layer/635 "2025-05-14T02:42:41Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://europe1.discourse-cdn.com/flex018/uploads/qfield/original/1X/7d3726da0ef5099a1e135505c03d2f125d527aae.png) [@system](https://community.qfield.org/u/system)\
**Post date:** [14 May 2025 02:42 UTC](https://community.qfield.org/t/when-i-package-my-project-for-qfield-for-some-eldritch-reason-it-leaves-out-all-features-on-a-specific-layer/635/1 "2025-05-14T02:42:41Z")

</div>

Expanding on it.

Said layer contains around 200 point features, I used this project for months now without any such problems, and suddenly it decided to do this. Project also contains half a dozen tables which are packaged without issue, all of their records are intact. The only “new” thing I’ve done is move around a few points to better reflect reality on the field earlier this week, but I noticed no issue until I tried to package the layer with the QFieldSync pluggin. I cannot access the project rn, so the amount of info i can give is limited somewhat, sorry.

* * *

_Imported from [GitHub discussion](https://github.com/opengisch/qfield/discussions/4283) by @PandarianPwnerfluken on 2023-05-12T14:09:57Z_

---

<div class="post-metadata">

**Author:** ![system](https://europe1.discourse-cdn.com/flex018/uploads/qfield/original/1X/7d3726da0ef5099a1e135505c03d2f125d527aae.png) [@system](https://community.qfield.org/u/system)\
**Post date:** [14 May 2025 02:42 UTC](https://community.qfield.org/t/when-i-package-my-project-for-qfield-for-some-eldritch-reason-it-leaves-out-all-features-on-a-specific-layer/635/2 "2025-05-14T02:42:42Z")

</div>

Is it possible that the button only copy features in the area of interest is checked where you do the layer settings for qfield?

* * *

_Imported from [GitHub comment](https://github.com/opengisch/QField/discussions/4283#discussioncomment-5888864) by @ThomasDV1984 on 2023-05-12T21:14:56Z_

---

<div class="post-metadata">

**Author:** ![system](https://europe1.discourse-cdn.com/flex018/uploads/qfield/original/1X/7d3726da0ef5099a1e135505c03d2f125d527aae.png) [@system](https://community.qfield.org/u/system)\
**Post date:** [14 May 2025 02:42 UTC](https://community.qfield.org/t/when-i-package-my-project-for-qfield-for-some-eldritch-reason-it-leaves-out-all-features-on-a-specific-layer/635/3 "2025-05-14T02:42:44Z")

</div>

Sadly not, I checked and it was turned off. As far as I know there hasn’t been any change in settings since the last time I packed the project, It’s possible someone fiddled with the settings without my knowledge, but I haven’t noticed any change. The layer was in offline editing mode, I tried packaging it in different directories, different versions of the project. I’d also do with a workaround if all else fails.

* * *

_Imported from [GitHub comment](https://github.com/opengisch/QField/discussions/4283#discussioncomment-5890419) by @PandarianPwnerfluken on 2023-05-13T06:28:14Z_